DOD SR400D Especificaciones descargar pdf (Pagina 65)

 5. Check the fuel level in the gasoline tank. Fill the

tank as needed with unleaded gasoline mixed with

2-cycle oil at a ratio of 2.6 ounces of oil mixed in

with 1 gallon of gasoline.

 6. Open the inline gasoline flow valve, located at the

base of the gasoline tank. Push primer button

located right rear of carburetor 4 to 5 times.

 7. Place the choke lever in the "CHOKE" position

(lever down). The lever is located behind the air

filter on the carburetor. IF THE ENGINE IS

ALREADY WARM, PLACE THE LEVER IN THE

"RUN" POSITION (LEVER UP).

 8. Set the engine throttle lever in the middle position.

The lever is located on the left side of the frame.

 9. Ensure that the pesticide flow is off. For dusts and

granules, twist the pesticide discharge tube all the

way to the vertical position (Handle up). For mist

spray and ULV operations, turn off the pesticide

control lever located halfway along the discharge

tube at the top of the control handle.

 10. Add the pesticide to the pesticide tank.

START-UP PROCEDURES

 11. Firmly pull the starter rope until the engine starts.

CAUTION: HEARING PROTECTION REQUIRED.

Return the rope to the engine in one motion; do not

let go of the rope.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 65