DOD SR400D Especificaciones descargar pdf (Pagina 53)

 (3) Add the solid metal plate, which is provided

with the unit, to the top of the grooved plate,

and ensure that there is a good seal by

pressing the rubber edges of the plates down,

until they are flush with each other.

 (4) Secure the tank back to the unit ensuring that

both plastic tank nuts are tightened equally.

 (5) Secure the pesticide line.

 c. Secure the air pressurization line that runs from

the top of the blower to the base of the pesticide

tank.

 d. Connect the outer pesticide feed line to the base

of the tank, along the top of the discharge tube,

through the inline cutoff valve, to the nozzle.

 e. With the engine off (remember that the pesticide

flow is gravity fed), examine the system for leaks

as follows: (1) add about 1 quart of water to the

tank (2) open the inline flow valve, located

midway along the discharge tube, and (3) open

the volume control cock located on top of the

nozzle. Tighten all leaking areas as required and

then drain any remaining water from the system.

BE SURE TO PURGE THE WATER FROM THE

PESTICIDE LINE.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 53