DOD SR400D Especificaciones descargar pdf (Pagina 195)

187

 21. Remove the pick up tube from the formulation tank.

 22. Disconnect the white nylon nut and fluid line from

the nylon elbow fitting attached to the filter/orifice

chamber Use two

” wrenches (one to hold the

tank fitting and the other to unscrew filter/orifice

chamber nut). Remove the orifice disc and filter

screen and install in the calibration pickup tube

assembly (supplied with the machine). Place an

orifice disc in line #39, 4 oz minute.

 23. With the machine running, Run for one full minute

and note the amount of fluid used. It should be 4 oz.

Repeat for a second test. Try the other orifices #14,

1 oz/min, #22, 2 oz/min, #29, 3 oz/min and #51 6

oz/min.

APPLICATION

 24. Read and understand and follow PESTICIDE label

instructions.

 25. Use only pesticides that are labeled for your specific

application

 26. Always use protective clothing and a respirator that

matches the pesticide and particle size being

applied.

 27. Do NOT release the pesticide formulation flow until

the proper air pressure (60-90 psi) is reached.

SHUT-DOWN PROCEDURES

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 195