DOD SR400D Especificaciones descargar pdf (Pagina 177)

169

Pressure should read 6 psi. If not, readjust the

engine RPM by moving the throttle lever up or

down. Check the RPM meter located on the frame

below the throttle lever.

 19. Turn the FLUID SELECTOR VALVE to the FOG

position.

 20. YOU ARE NOW READY FOR THE ULV

APPLICATION.

 21. Before attempting to calibrate, remove the

pesticide line at the nozzle and place it into a

suitable empty container. With your PPE on, turn

on the main toggle switch located below the

engine. Turn the fog switch, located on the front of

the pump box, to the “ON” position and collect fluid

for one minute.

 22. To calibrate, set the blue pointer on the right side

of the pump to an arbitrary scale setting of 0-10.

To change the flow, move the pointer up or down.

 23. CAUTION: BEFORE MOVING THE POINTER,

loosen the knurled knobs with your fingers and turn

the wheel by the pointer. “Hand-tighten” the

knurled knobs when the calibration is done.

 24. The rate of speed during the spray operation is

generally 5 or 10 MPH. The correct speed for

each type of pesticide is written on the pesticide

label.

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 177