DOD SR400D Especificaciones descargar pdf (Pagina 111)

103

 16. Keep track of the pesticide level inside of the tank

by occasionally examining the clear tubing at the

back of the tank.

OPERATING PROCEDURES

 17. Turn the ratchet type flow valve, located on top of

the surge tank, to pressurize the hose and gun.

 18. Adjust the pressure on the gauge to 200 psi by

turning the locking nut, located under the large

spring next to the pump, clockwise.

 19. Unwind the hose from the spindle and examine it

and the connection for leaks.

 20. Point the gun at the intended target area and pull

the trigger. You can adjust the spray pattern by

turning the adjuster located behind the trigger.

TERMINATING PROCEDURES

 21. Discontinue spraying by releasing the spray gun

trigger.

 22. Release the pressure in the hose and spray gun by

turning the ratchet type valve located on top of the

surge tank. Be sure to pull the trigger again to

expel any material that is still in the hose.

 23. Drain remaining pesticide from the tank through

the drain line, located at the bottom, rear of the

tank, into an approved holding tank.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 111