DOD SR400D Especificaciones descargar pdf (Pagina 116)

108

OPERATING PROCEDURES

 18. Using the Spray Gun Assembly

 a. Close the pressure relief valve, located until 200

psi reads on the pressure gauge.

 b. Unwind the hose from the spindle and examine it

for possible leaks.

 c. Open all three inline flow valves to the gun.

 d. Point the gun at the intended target area and pull

the trigger. Adjust spray pattern as needed.

 19. Using The Boom Assembly

 a. Unhook and GENTLY let down the boom, or

booms (depending on what is required for the

operation).

 b. Ensure that both spray gun's inline flow valves

are closed.

 c. Select the proper setting on large valve located

on left front of tank to boom or booms needed

(i.e., center-left-right or left-center-right).

 d. Turn the pressure relief valve until the pressure

gauge on the boom selector valve reads 40 psi.

This is to be done after turning on the (two) inline

valves located behind the pressure relief valve at

the right front of tank. (i.e., pull top rope forward

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 116