DOD SR400D Especificaciones descargar pdf (Pagina 41)

OPERATING PROCEDURES

 11. Put on all personal protective gear.

 12. Lay sprayer on its side to fill the pesticide tank (we

recommend the use of a funnel with at least 60

mesh screen to fill tank). Fill the insecticide tank to

within 1/2" of the top. When replacing the tank

cap, be sure that the O-ring is in place.

 13. Restart the engine, and then depress the throttle

level (pull up) to full rpm's. Open the control valve

to start the flow of insecticide. The engine should

always be running at its fastest speed when

discharging insecticide.

TERMINATING PROCEDURES

 14. ALWAYS close the control valve first! This stops

the flow of insecticide.

 15. Release the throttle to reduce the engine RPM to

idle. NOTE: It is ABSOLUTELY NECESSARY to

close the control valve before reducing the engine

speed. If the control valve is left open with the

engine idling, the insecticide will not be atomized

and will drip from the nozzle.

CALIBRATION

 16. Fill the insecticide tank with a known measure of

insecticide.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 41