DOD SR400D Especificaciones descargar pdf (Pagina 205)

197

 3. Check the engine oil level with the dipstick, located

on the rear of the engine. Add 30W oil as needed.

Complete oil change requires approx. 1.5 quarts of

oil.

 4. Check the blower oil level using sight glasses

located below the nozzles. Add 40W non-detergent

oil as needed.

 5. Check the battery water level. Add to the proper

level according to manufacturer's specification. For

"maintenance free" batteries, check indicator light.

 6. Ensure that the sprayer battery cables are clean

and tightly connected.

 7. Check the belt tension by pressing down on the

belt between the engine and the compressor with

your finger. A properly maintained belt should

deflect between

and

inches. NEVER

ATTEMPT TO CHECK THE BELTS WHILE THE

ENGINE IS RUNNING.

 8. Check the flushing solution level in the small black

tank located to the left of the control panel, and fill

the container as needed.

 9. Open the gasoline control valve, located in the fuel

line, next to the carburetor. If equipped with an

electric fuel pump toggle switch, turn the switch

on/off as needed. The toggle switch is located on

the frame next to the right side of battery.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 205