DOD SR400D Especificaciones descargar pdf (Pagina 56)

 i. Examine the granule metal plate. With the

pesticide control lever still in the "OFF" position,

the gates should be closed. If this is not the case,

reset the plate properly making sure that the

rubber gasket is flush with the unit. REMEMBER

TO FOLLOW THE GUIDE MARK DRAWN ON

THE PLATE.

 j. Open the pesticide control lever all the way. In

this position, the gates should also be completely

open.

 k. Secure the tank back to the unit ensuring that

both plastic tank nuts are tightened equally.

PRE-START PROCEDURES

 4. Put on all personal protective gear.

 5. Check the fuel level in the gasoline tank. Fill the

tank as needed with unleaded gasoline mixed with

2-cycle oil at a ratio of 6 oz. of oil mixed with 1

gallon of gasoline.

 6. Open the gasoline flow valve, located on the front

of the carburetor.

 7. Place the choke lever in the "CHOKE" position

(lever up). The lever is located behind the air filter

on the carburetor. IF THE ENGINE IS ALREADY

WARM, PLACE THE LEVER IN THE "RUN"

POSITION (LEVER DOWN).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 56