DOD SR400D Especificaciones descargar pdf (Pagina 20)

OPERATING PROCEDURES

 13. Discontinue spraying the water and release the

pressure inside the tank by depressing the air

release valve, located on the tank cover.

 14. Remove the tank cover and dump out the water.

 15. Put on all personal protective gear.

 16. Calculate the amount of pesticide concentrate

required for the operation.

 17. Add the calculated amount of carrier first and then

add the pesticide, through a 60-mesh screen filter,

to bring the solution up to the label's

recommendation.

 18. Replace the tank cover and gently agitate the tank

to allow proper mixing of the pesticide.

 19. For pin stream applications, pump the sprayer 4-5

times. For fan spray applications, pump the

sprayer about 20 times, or until it becomes hard to

pump. (The optimum pressure for fan spraying is

approximately 40 psi, which is about 20 pump

strokes.)

 20. Dispense the pesticide by depressing the wand's

trigger. For crack and crevice, or pin stream

applications, the nozzle should be placed as close

as possible up against the area to be sprayed.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 20