DOD SR400D Especificaciones descargar pdf (Pagina 230)

222

 3. Unscrew the pesticide container, located at the

base of the nozzle, and pour in the ULV/ULD

concentrate.

 4. Screw the container back onto the unit.

 5. Ensure that the metering stem is in a horizontal

position (The holes in the stem should be parallel

with the ground). When the stem is in this position,

the pesticide flow is off.

 6. Open the gasoline cutoff valve located underneath

the gasoline tank.

 7. Close the choke, located on the side of the

carburetor, by pushing the lever down. (Omit this

step if the engine is already warm).

 8. Put on all personal protective gear.

OPERATING PROCEDURES

 9. Firmly pull the starter rope until the engine starts.

Return the rope to the engine in one motion (i.e.,

do not let go of the rope).

 10. As the engine warms up, slowly open the choke.

 11. Ensure that the indicated operating pressure (on

the pressure gauge) reads between 3.0 and 3.5

psi. To change the operating pressure, adjust the

engine throttle set screw, which is located on top of

the carburetor.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 230