DOD SR400D Especificaciones descargar pdf (Pagina 110)

102

 8. Open the gasoline valve located underneath the

gasoline tank.

 9. Using the spray gun, select the proper nozzle disc

(read the pesticide label) and secure it to the spray

gun at the nozzle cap. (Remember: the flow rate of

the disc cannot exceed the capacity of the pump).

 10. Open the pesticide tank cover and clean the

basket filter as needed.

 11. Close the choke, located behind the air filter cover,

by pulling the lever towards the cover. (Omit this

step if the engine is already warm.)

 12. Pull the starter rope firmly until the engine starts.

CAUTION: HEARING PROTECTION REQUIRED.

Return the rope in one smooth motion (i.e., do not

let go of the rope).

 13. As the engine warms up, slowly open the choke.

 14. Put on all personal protective gear.

 15. Fill the pesticide tank with half of the carrier

needed (read the pesticide label), then add the

measured amount of pesticide to bring the solution

up to the label's recommendation and then add the

remainder of the carrier (Adding the pesticide while

the engine is running aids in the mixing of the

material). If using a wettable powder, add 1 pint of

kerosene to every 100 gallons of liquid to inhibit

foaming.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 110