DOD SR400D Especificaciones descargar pdf (Pagina 207)

199

STARTING PROCEDURES

 17. Set the throttle switch on the instrument panel to

the "IDLE" position and flip the toggle switch,

located on the right side of the engine, to the "ON"

position. If engine fails to start, ensure sparkplug

gap is .030 thousandths of an inch. Spark plug

should be resistor type, Briggs & Straton Part#

802592 or champion spark plug RJ19LM.

 18. Turn engine switch, located on top of the engine,

to the "ON" position. Push the starter button,

located on the instrument panel, for a maximum of

30 seconds, or until the engine starts. CAUTION:

HEARING PROTECTION REQUIRED.

 19. As the engine warms up, slowly open the choke.

 20. Set the toggle switch into the "THROTTLE"

position.

Operating Procedures:

 21. Turn the 4way valve on the control module to the

"INSECTICIDE" position.

 22. Check the blower pressure gauge. If the gauge

does not read between 4.5 and 6.0 psi, then adjust

the engine speed by turning the silver throttle set

screw located on the carburetor.

 23. YOU ARE NOW READY FOR A ULV

APPLICATION.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 207