DOD SR400D Especificaciones descargar pdf (Pagina 124)

116

 16. Fill the tank with the carrier needed, read

the

pesticide label

and then add the measured amount

of pesticide/herbicide to bring the formulation up to

the label's recommendations (Adding the pesticide/

herbicide, while engine is running, aids with mixing.)

If using wettable powders, ADD 1 PINT OF

KEROSENE TO EVERY 100 GALLONS OF

FORMULATION IN THE TANK TO INHIBIT

FOAMING.

 17. Keep track of the level in the tank by occasionally

examining the clear tube at the left front of the tank.

OPERATING PROCEDURES:

USING THE SPRAY GUN ASSEMBLY

 18. The Locking Clip on the Pressure Control Unit may

be positioned in one of 4 notches in the housing.

This provides 4 different pressure settings when the

lever is pushed down. Select the setting that

provides the correct pressure for your use.

 19. Ensure the pressure gauge reads 200 psi. For fine

adjustments, lift the wire clip off and turn the knurled

thumbnut on the plunger stem. Turn clockwise to

decrease pressure, counter-clockwise to increase

pressure. Engage the lever into one of the 4

available positions in the housing.

 20. Unwind the hose from the spindle and examine it for

possible leaks.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 124