DOD SR400D Especificaciones descargar pdf (Pagina 122)

114

PERFORMANCE CHECKLIST FOR THE

SMITHCO MODEL 6911

100-GALLON HYDRAULIC SPRAYER

SET-UP PROCEDURES

 1. Secure the unit to a truck for towing, safety chain

installed.

 2. Check the gasoline level of the gas tank located on

the left side of the engine and fill with regular

unleaded gas as needed.

 3. Check the engine oil level. The plug is located at

rear of engine. Fill to the bottom of the threads with

30-weight HD oil.

 4. Check the oil level in the pump; the clear plastic site

tube located at the front of the pump should be filled

to half full with 30-weight oil.

 5. Be sure to check charge in pulsation damper

located on top of pump dome. Damper should be

charged with compressed air up to 10% of operating

pressure (200 psi). This ensures smooth operating

pressure of the pump.

 6. Check the belt tension midway between the engine

and pump. Properly maintained belts should deflect

inches. NEVER ATTEMPT TO CHECK

THE BELTS WHILE THE ENGINE IS RUNNING.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 122