DOD SR400D Especificaciones descargar pdf (Pagina 196)

188

 28. Close the chemical control valve to stop the flow of

pesticide (toggle switch or manual valve).

 29. Let engine run until all chemicals are expelled from

the nozzle (30 seconds).

 30. Use the STOP switch at the throttle control on

engine below the air filter to stop the engine.

 31. Always flush out entire system through the nozzle.

IAW manual, use soap and water, and dry the inside

of the tank with rags, - or air dry.

PREVENTIVE MAINTENANCE

 32. Daily (or Before Every Use)

 a. Air pump - Check oil level daily. Oil level must be

to the top mark on the dipstick. Use only London

Fog Anderol 500 or Amsoil Synthetic

Reciprocating Compressor Oil. Do not use

petroleum oil.

 b. Engine - Check oil level. Oil level must be to the

top of the fill hole. Pay particular attention to the

engine requirement to change the oil after the

initial five hours of running time.

 c. Belt- Check drive belts which should be in perfect

alignment and neither excessively tight or loose

enough to slip.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 196