DOD SR400D Especificaciones descargar pdf (Pagina 55)

SET-UP PROCEDURES FOR DUSTS AND GRANULES

Start this procedure with the assumption that the unit is in

the mist spray configuration.

 3. a. Disconnect and remove the air pressurization line

that runs from the top of the blower to the base of

the pesticide tank. Plug the openings with the

attached stoppers.

 b. Disconnect and remove the entire outer pesticide

feed line and the nozzle.

 c. Remove the pesticide tank cover and ensure that

the inside of the tank is clean and dry.

 d. Disconnect and remove the pesticide feed line

from inside of the tank and plug the pesticide line

exit hole with the stopper provided.

 e. Using the tools provided, remove the pesticide

tank by loosening the two plastic nuts located

outside and underneath the tank.

 f. Simultaneously pull the nuts outward and lift the

tank away.

 g. Remove the solid metal plate from the base of

the unit.

 h. Ensure that the dust volume control lever, located

on the bottom left side of the frame and inside of

the throttle control lever, is off (all the way down).

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 243 244

Sin comentarios

DOD SR400D Especificaciones Pagina 55