DOD SR400D Manual de usuario descargar pdf (Pagina 5)

ADJUSTMENT

While Tool is in the

Pod, push handle

down and twist.

Twist until it locks into 1 of it's 4 positions.

Twisting counter-clockwise will permit a 180

turn. Twisting clockwise will permit a 90

turn.

Note: Head Assembly does not make a full 360

turn

Use this wrench to remove

or intall tips

CHANGING TIP

TSX713

Desoldering Tip

INSTALLING:

Tighten this last

Tighten this first

Should be done while the tool is

cool.

REMOVING:

Loosen this first

Lossen this last

adjustment

screws

To tilt the Head Assembly, loosen (2) Adjust-

ment Screws. Tilt the Head Assembly to de-

sired position and retighten screws.

Tip

Cleaning Shaft Handle

Retaining Sleeve

IT IS RECOMMENDED FOR THE

OPERATOR TO REMOVE AND

INSPECT THE TIP DAILY.

REPLACE TIP THERE IS ANY SIGN OF

CORROSION . DOING THIS WILL

ALSO PREVENT THE TIP FROM

SEIZING ON TO THE HEATER.

Before tightening the Retaining

Sleeve

Check tip alignment by inserting the end of the

Cleaning Shaft handle inside the tip, then tighten

Retaining Sleeve

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comentarios a estos manuales

Sin comentarios

DOD SR400D Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos musicales DOD SR400D